1. Careers
  2. Stay tuned
  3. Contact

Corporate HQ Offices

Planthofsweg 79
7601 PJ Almelo
The Netherlands
Tel: +31 (0)546 545 570
info@aeronamic.com

Follow us

Casper Luiten – Intern at Aeronamic

PUSH LIMITS

Let me tell you more about my internship at Aeronamic, a leading company in the field of centrifugal compressor technology. As a student in Aerospace Engineering and Systems & Control at TU Delft, I had the opportunity to do an internship at this innovative company. Let me tell you about my experiences, challenges and why I would definitely recommend Aeronamic to other students.

My internship assignment at Aeronamic revolved around the development of a numerical model for a Vapor Compression Cycle (VCC) system. This may sound complicated, but it gave me the opportunity to apply my theoretical knowledge to a practical project. Under the guidance of Dieter ‘t Mannetje, the team leader of the E-compressor team, I dove deep into the world of thermodynamics, fluid mechanics and programming.

I’ll be honest, my internship period was not always easy. But each challenge brought new insights and satisfaction. I not only learned a lot about my specific assignment, but also about the company culture within Aeronamic. The team was always ready to help me and the amount of knowledge within the company was amazing.

What really set Aeronamic apart for me was the openness and willingness to share knowledge. I always felt welcome to ask questions and my supervisors really took the time to help me grow. The professional attitude and honest communication were very valuable to me and I hope to apply this in my own work in the future.

After my internship, I am definitely interested in possible opportunities at Aeronamic. The company offers an environment where I can further develop in my passion area. Of course, there are challenges, such as the travel distance, that I need to consider, but I am confident that this is solvable.

In conclusion, I would highly recommend Aeronamic to other students who are interested in working with cutting-edge technologies. Yes, it is hard work and your knowledge will be tested, but the experience you gain is invaluable. If you are willing to challenge yourself, an internship at Aeronamic will definitely not disappoint you.

  • NDO Process Operator

    MBO Almelo - Netherlands

    Metaalkanjers beheert deze vacature namens Aeronamic. Zoek je een functie met afwisseling, verantwoordelijkheid en vrijheid? Wil jij aan de slag binnen de dynamische wereld van de luchtvaartindustrie? En werk jij…

    Read More

  • MRO Process Engineer Aerospace

    HBO Almelo - Netherlands

    Metaalkanjers beheert deze vacature namens Aeronamic. Ben jij een gedreven technicus met een passie voor luchtvaart? Wil jij een cruciale rol spelen in het onderhoud en de optimalisatie van hoogwaardige…

    Read More

  • Allround Assemblagemedewerker

    MBO Almelo - Netherlands

    Metaalkanjers beheert deze vacature namens Aeronamic. Bij Aeronamic ga jij de uitdaging aan om onderdelen voor de vliegtuigindustrie te produceren. Ondanks dat jij 150 collega’s krijgt, zijn wij met name…

    Read More

  • Bankwerker

    MBO Almelo - Netherlands

    Metaalkanjers beheert deze vacature namens Aeronamic. Bij Aeronamic ga jij de uitdaging aan om onderdelen voor de vliegtuigindustrie te maken. Ondanks dat jij 150 collega’s krijgt, zijn wij met name…

    Read More

  • Electronics Design Engineer

    WO Enschede - Netherlands

    De Electronics Design Engineer binnen onze vestiging in Enschede is mede verantwoordelijk voor het gehele ontwerp, de ontwikkel- en testcyclus van de aandrijving van elektrische hogesnelheid compressoren. De compressoren worden ingezet voor luchtvaart en…

    Read More
polygon






I studied Mechanical Engineering at Twente University. With Introduction into Aeronautical Engineering and Lean Six Sigma as elective courses, Aeronamic was the perfect company to do my graduation project (2011/2012).

During my graduation, it already became clear that improvement projects are enthusiastically embraced by everyone in the company and that you can find help and cooperation everywhere. READ MORE>>

Lisa Blom – Process Engineer

Back in 1995, I was really pleased to be offered a job at Aeronamic, because working in the Aerospace industry was a great opportunity. During my study I got acquainted with innovative techniques like CAD/CAM, CNC machines and 3D measuring machines. These techniques were applied extensively at Aeronamic. During the first years of my employment I was part of the production team where I got more experienced with several types of CNC milling machines, lathes, work centers and machining technology. READ MORE>>

Erjan Kelder – Business Intelligence Officer

Let me tell you more about my internship at Aeronamic, a leading company in the field of centrifugal compressor technology. As a student in Aerospace Engineering and Systems & Control at TU Delft, I had the opportunity to do an internship at this innovative company. Let me tell you about my experiences, challenges and why I would definitely recommend Aeronamic to other students. READ MORE>>

Casper Luiten – Intern at Aeronamic